The main purpose of doors for the cold rooms is the thermal insulation of the doorway through which the products are loaded and unloaded. Therefore, the construction, hardware of doors should not have the “thermal bridges”, or reduce them to a minimum. The doors must withstand the temperature conditions and workload in the refrigerated chambers; so it is important, when choosing doors, select the right type of door and its technical characteristics: size, insulation thickness, etc.

The wing parts of the cold store doors are made of the panel by polyurethane injected between two sheets. The thicknesses of our doors are 60 mm, 80 mm, 100 mm, 120 mm, 150 mm. the wing frame profiles which are specially designed for our COOL DOOR branded doors are equipped with air channel wing seal and heat barrier in order to prevent possible condensation problem and heat losses that may occur because of the door is in the outside border continuously. As surface material indoors; polyester painted galvanized sheet, PVC coated galvanized sheet and stainless steel sheet are available. The door of our doors can be produced from the special aluminum profile or from the same aluminum with the wing detail if required. Our cases are suitable for panel thickness. All accessories that used in our doors are manufactured in accordance with international standards.we have the type of doors, HINGED DOORS, SLIDING DOORS, FLIP FLAP DOORS, SECTIONAL DOORS